M6x20mm, x4
ASSEMBLY INSTRUCTIONS FOR CHAIR MODEL
RTA-0098M
PARTS LIST
ATTENTION: Before you begin the assembly,
make sure that all parts are included in good
condition.
ATTENTION:
⚠
Follow the instructions step by step.
⚠
To avoid misalignments, leave the screws loose and do not tighten them until all are in their respective places.
⚠
Do not overtighten or force the screws as they could break, strip, or damage the threads of the holes.
⚠
Using the wrong size of screws on a part could result in damage to the screw or the part.
G (LEFT)
E
H
F
J
C
B
B
D
I
A
Backrest, x1
B
Seat, x1
D
Mechanism,
x1
E
Hydraulic
Gas Lift, x1
F
Base Cover, x1
C
Star Base, x1
H
Caster, x5
I
J
M6x30mm, x2
L
M
K
Insert the casters (F) into the legs of
the base (C) using pressure, then
place the base cover (H) and the gas lift (E)
in the middle of the base as shown.
Place the seat (B) upside-down with
its front towards you as shown. Using
screws (I), assemble the mechanism (D) to
the seat with its knob facing to the FRONT.
With the seat positioned as shown,
assemble the armrests (G) on their
respective sides using the short screws (J)
for the inner holes and the longer screws (K)
for the outer holes as shown.
Insert the metal plate of the backrest (A) into the mechanism
(D) and secure it with screws (L) as shown.
Place the seat over the base, making sure the tip of the gas lift
enters into the hole of the mechanism.
X1 Right
X1 Left
(Mechanism)
(Armrests)
Allen Wrench, x1
G
(RIGHT)
Tighten well all the screws before you
sit on the chair for the first time.
NOTE: When you are seated
on the chair, not looking at it.
G
Armrest
M6x35mm, x4
(Backrest to mechanism)
(FRONT) (BACK)
(Note: This part might
come with the gas lift or
attached to the base)
(Armrests)
M8x20mm, x3
☛
ATTENTION:
J: Shorter screws for inner holes
K: Longer screws for outer holes
J
K
K
K
K
L
(Note: Part H might
come with the gas lift
or already attached
to the base)
A
A
D
D
