background image

 

8

Unpacking 

Immediately upon receipt, carefully unpack and inspect the fixture to verify that all parts are 
present and have been received in good condition.  If any parts appear damaged from shipping 
or the shipping carton shows signs of mishandling, retain all packing material for inspection and 
notify the shipper immediately.  Save all original packing and carton.  In the event that the 
merchandise is to be returned, the original carton and packing must be used.  The customer will 
be billed for a new carton and packing if merchandise is received without the original carton and 
packing.  The plastic bag shipped with the fixture can be used to keep the fixture clean if stored 
or installed in a temporarily dusty environment.  Do not operate fixture with plastic bag in place. 
 
 

Save Shipping Materials 

The packing and carton are designed to provide the fixture with protection during 
shipping.  Save original packing and documentation for warranty, service and return 
issues.  Additional charges will be applied to return items not received in original or 
incomplete packing. 

 
 

Claims 

Physical damage must be reported to the Freight Carrier or Shipping Company upon 
receipt of merchandise.  Damage incurred in shipping is the responsibility of the Freight 
Carrier or Shipping Company.  It is the customer's obligation in the event that 
merchandise is received damaged caused by shipping to notify the Freight Carrier or 
Shipping Company immediately.  All other claims not related to damage incurred during 
shipping must be made to the Dealer or Distributor within 7 (seven) days of receiving 
merchandise.  

 
 

Returns 

Returned merchandise must be sent prepaid, in the original packing with a Return 
Merchandise Authorization number (RMA) clearly listed on the shipping label.    Items 
sent by Freight Collect or without a RMA number will be refused.   Call your sales person 
and request a RMA prior to shipping.  Be prepared to provide the model number, serial 
number and a brief description of the nature of the return.  Shipping damage resulting 
from inadequate packaging is the customer’s responsibility.  Customer will be charged 
additional shipping charges to return products received in non original packing and or 
cartons. 

Summary of Contents for IL-TRACKER250S/1





























Reviews: