TechNexion Vizionlink PCIE-VL-3480, Quick Install Manual

Page: 1 / 2

Quick Install Guide
8-Port Vizionlink™ Frame Grabber Card (PCIE-VL-3480)
1. Identifying the Parts
Grabber card gold finger
FAKRA connectors
Follow the sequence to connect the cameras.
Firmware update switch
6-pin 12V power plug
1
5
2
6
3
7
4
8
Note: To update the firmware, toggle the switch to the programming mode (right side) and strongly suggest operating this procedure by a technician.
2. How to Assemble the Card and the Cameras
1. Push down the grabber card into the PCIe slot directly.
2. Make sure the golden finger of the card is inserted firmly, and secure the card with a screw.
3. Connect a 6-pin 12V power plug from the system power supply.
4. Connect the coaxial cable into the FAKRA connector of the frame grabber card on the I/O rear panel of the computer and the other end to a
camera. Follow the sequence mentioned in the Identifying the Parts section to connect other cameras.
4
1
3
2
INNOVATORS OF TECHNOLOGY