Techness SE800, User Manual, Page: 24 / 75

6. 6. Training in USER mode:
After USER PROGRAM selected, you may set prefer program profile by turning UP/DOWN button
and press ENTER for each flashing column (FIGURE 11). There are 20 segments for setting, if you
want to quit during setting, you may hold on ENTER button for 2 seconds to quit, the previous
setting profile will be saved for unfinished segment.
FIGURE 11
7. Training in H.R.C. mode:
AGE 25 is flashing after enter H.R.C. mode, you may set your age by turning UP/DOWN button and
press ENTER. The monitor will calculate preset heart rate value automatically according to your age
setting. Screen will show heart rate percentage 55%, 75%, 90% and TARGET. You may select heart
rate percentage by UP/DOWN/ENTER button for training.
8. Training in WATT mode:
The preset watt value 120 is flashing on screen in WATT setting mode, select UP/DOWN/ENTER to
set target value from 10 to 350. Press the START button to start training. (FIGURE 12)
FIGURE 12
9. MP3 Player
Computer power on, MP3 display area will show HELLO. (FIGURE 13).
FIGURE 13