AUX–IN Jack
To listen to an external source, such as a MP3 player or Smartphone, connect a suitable
cable (3.5mm jack to 3.5mm jack) to the AUX–IN socket [17] at the back of this unit, and
press the function button [5] to enter into the AUX–IN mode.
Press the REC button [10], the REC indicator [12] will light up green and the external
source will be recorded to the USB flash drive. Press the REC button [10] again to save the
recorded file. REC indicator [12] will turn off.
Attention: The volume from external devices is not loud enough. You must increase the
volume from your external device.
Headphone connector
Connect your headphone to the headphone socket [16] to enjoy music via headphone.
RCA output for external loudspeaker
The red RCA output is the right audio channel; the white RCA output is the left audio
channel. Connect one side of the RCA connection cable* (*not included) to a stereo system
or an amplifier with loudspeaker and the other side to your RCA outputs of the TX-94. Now
you can listen to music played by your TX-94 over your audio home system.
How to replace the needle
Removing the needle from the tone head: Place a screwdriver at the tip of the needle
head and push downwards in the direction illustrated by “A”. Remove the needle head shell
by pulling it forwards and pushing downwards.
Inserting the needle from the tone head: Hold the tip of the needle head shell and
insert it by pressing in the direction illustrated by “B”. Push the needle head shell upwards
in the direction illustrated by “C” until the needle locks into the tip position.
Guide Pins (inside)
