Technaxx
®
* User Manual
Jump Starter 10000mAh TX–78
The Declaration of Conformity for this device is under the Internet link: www.technaxx.de/ (in
bottom bar “Konformitätserklärung”). Before using the device the first time, read the user manual
carefully. This device has a rechargeable battery. It must be fully charged before first use.
NOTE: Charge the battery of the device every 2–3 month if it is not used!
Service phone No. for technical support: 01805 012643 (14 cent/minute from German fixed-line and
42 cent/minute from mobile networks). Free Email: [email protected]
Important Hints *
This device is only suitable for CARS (12V) !
This device has 5 indicator lights (= LED). When only 3 LEDs are shining, or less, then do
NOT use the device to start your car ! But you can use it for charging digital devices.
When trying to start your car more than 3x without success, stop starting it. Disconnect the
device to avoid damaging other parts of the car. Check the power of the device 1x per
month and also charge it to ensure it can work in an emergency case. Do NOT use the
device all the time for charging. Maybe then it will not have enough power for starting a car
in an emergency situation. Device shuts down automatically when it is not loading other
external devices.
Features
3-in-1 Power Bank: Jump Starter for the car battery, Charging (e.g. Smartphone, Tablet
PC, etc.), Emergency Light Jump start: diesel cars up to 3L engine, gasoline/petrol cars
up to 5L engine Integrated emergency light (3 lighting effects) Built-in protection against
overcurrent, short circuit, overload/-charge and overvoltage
2 USB outputs for
simultaneous charging of two devices 4-in-1 charging cable supports Micro USB & Mini
USB & Lightning & 30-pin connector
Ideal size to fit into the inner front glove
compartment
Technical specifications
Jump Start output
12V output for starting a car
Starting current / Peak current 300A / 400A
Input voltage
at home 15V/1A, in a car 12V/1A
Output (USB ports)
5V/1A and 5V/2A
Battery Clamps
Input: DC 10.8–15V 400A, Output: DC 12V 400A
Battery
Lithium polymer battery 10000mAh 3.7V / 36.63Wh / Charging time ~4 hours
When device is fully charged it can charge iPhone 6S ~3 times
When device is fully charged it can be used ~200 times
Operating temperature
0°C up to +60°C
Storage temperature
–10°C up to +60°C
Weight / Dimensions
385g / (L) 16.5 x (W) 7.3 x (H) 2.8cm
Package Contents
Jump Starter 10000mAh TX-78, 4-in-1 USB cable, Jump Starter
cable with battery clamps, Home charger, Car charger, User Manual
Keep this manual for future reference or product sharing carefully. Do the same with the
original accessorie(s) for this product. In case of warranty, please contact the dealer or the
store where you bought this product .
Warranty 2 years
