8
TX-188, 5002, 09/22
Caution
Do not bend the stylus.
Do not touch the needle to avoid injury.
Turn
off the unit’s power before you replace the stylus.
Keep out of reach of
children.
Handle with care as the stylus is delicate. Use of a bent or
broken stylus may damage the record and cause malfunction.
Do not
expose the stylus to extreme heat.
Bluetooth mode
Bluetooth playing
Select the source switch (10) to “Bluetooth” by turn it to the left direction
until the indicator flashes blue. Then you should turn on your phone or other
media device and start the Bluetooth searching function, receive carrier will
receive the Bluetooth identification number for:
“Technaxx TX-188”,
when
your Bluetooth device is connected, the speaker will beep.
NOTE:
Unplug an AUX-IN or Headphone before use the Bluetooth
function. Put the Tone Arm on tone arm rest and security latch. Control the
music from your playback device which is connected to the LP Player
Bluetooth.
ATTENTION:
If you reboot the machine, you should repeat those steps to
get the Bluetooth function restarted. The last connected device connects
automatically.
AUX mode
Playing Music from an AUX input
Turn the unit ON by pressing the Power button.
Connect one end of
the 3.5mm AUX-IN cable (included) into the 3.5mm AUX-IN Jack on the
back panel of the unit and the other end to your audio device’s (CD player,
Tablet, MP3 player, Smartphone etc.) AUX jack.
Press PLAY on the external audio source.
NOTE:
The volume output is affected by the volume level on the source.
Ensure that the source volume is set to about 70-80% to avoid sound
distortion. Playback must be controlled from your connected audio device.
