Technaxx
®
LED
LED TouchFree 2.5W
User Manual
The Declaration of Conformity for this device is under: www.technaxx.de/ (in bottom bar “Konformitätserkärung”)
Features
Dimming and On/Off function by hand movement
Touchfree sensor on lamp top
Touchable sensor in lamp base Frosted lamp case makes a gentle light, no harm to
eyes Comparable with a conventional 20 watt halogen bulb
Built-in rechargeable battery
USB charging cable & AC adaptor included For interior lighting only
Easiest handling
Product View
Touchfree inductive area
Frosted lamp case
Touchable inductive icon
DC socket
Reset button
Sensor ON / OFF
Make sure the battery is fully charged before use the lamp the first time.
USB Charging
The USB charging cable is included in delivery. Connect it’s round end to the DC plug in
the lamp’s base, and the other side of the cable to a PC USB port or to an USB 5V adapter*
(* not included).
Charging time takes ~6 hours.
If the lamp dims even at the maximum lightness or the touchfree function is not sensitive,
it means the power is low and you have to charge the lamp. Fully charged lamp can last
~5 hours (steady light) up to ~3 days (short periods of light).
Touchfree Function (sensor in the lamp’s top)
Note: In order to make the touchfree function work well, there should be nothing within min.
1m over the lamp’s top (e.g. shelf, ceiling, etc.).
Put the switch “Sensor ON/OFF” at the lamp’s base to the ON position.
Pass with your
hand (without touching it) over the lamp’s top (max. 20cm distance)
The lamp turns ON.
Do it again and the lamp turns OFF.