8
Model: TX-184 Article No. 4983, 04/2022
View DTCs
Erase Codes
Notes:
This function is performed with key on
engine off. Do not start the engine.
Before performing this function, make sure
to retrieve and record the trouble codes.
After clearing, you should retrieve trouble
codes once more or turn ignition on and
retrieve codes again. If there is still some
trouble codes for hard troubles, please find
the reason caused the trouble code firstly, and then solve the problem. Now,
the trouble codes can be erased.
A warming message comes up asking for your
confirmation.
I/M Readiness
I/M refers to Inspection and Maintenance, that
is legislated by the Government to meet federal
clean-air standards. I/M Readiness indicates
whether or not the various emissions-related
systems on the vehicle are operating properly
and are ready for Inspection and Maintenance
testing. The I/M readiness Monitor Status
function also can be used (after repair of a fault
has been performed) to confirm that the repair
has been performed correctly, and/or to check for Monitor Run Status.
