11
Securely connect red wire to Positive terminal (“+”) of the battery and
black wire to Negative terminal (“-”) of the battery. The external siren
makes a short alarm sound when it is connected correctly to the
vehicle’s battery.
Fix the siren with ties to non-movable parts and mount it in suitable
position.
Inserting Car Alarm to the cigartte lighter socket
After inserting the Car Alarm to the cigarette lighter socket the light will
be solid blue for charging. The device is ready for operation and can
receive the command from the remote control.
Depending on the current status the Car Alarm’s LED indicator shows
below light color.
Status
LED Indication
Charging
Solid Blue
Charged
Sold Green
Low battery warning
Flash Blue continuously
Alarm
Flash Red continuously
Activated
Flash Red once with “Beep”
Deactivated
Flash Red twice with “Beep,Beep”
Armed
Flash Red every 5 seconds
Power off
Flash Red continuously with “Beep,Beep,
Beep,Beep”
When mounting the siren, make sure that the position of the siren
does not interfere with the closing of the engine hood.
Keep siren far away from engine, the heating of engine may destroy
the siren.
Make sure that the excess connection cable is coiled up and
additionally fastened securely in the engine compartment with cable
ties.
The included remote is already paired to the device.
