Page 15
P
res
s
ed
k
ey
i
nte
rpret
ati
on
Key pressed
Keypad configuration
PIN / ID keypad
Key code keypad
Keys 1
9 (digits)
Digits 1
9
Reason 1
9
Key 0
Digit 0
Reason 10
Key
(star)
Digits input cancel
Reason 0
Key # (hash)
Input submit (enter)
Reason 11
Table 14: Pressed key interpretation
Note: When the operating mode “
Standard with IDS control
” is set, the press of
# (hash)
key
before identification start
is interpreted as
request for changing the armed/disarmed
status of the IDS
.
6.8 Programming mode
The module enters programming mode by reading one of the two
programming cards
(cards
“
+
” and “
-
“). The programming mode cannot be entered while the module is in hardware
address setting mode (for modules with HW address setting via the communication line). The
module’s functionality in programming mode can be seen in
pictures 4 a-d
.
It is not possible to use time schedules when inserting cards in programming mode,
therefore cards are always valid. Any user inserted using a programming card has a default
PIN set to
12345
.
If the reader module’s keypad is set as a code keypad, the programming mode can be
entered by entering the right code at the keypad. It is also possible to insert cards using a
keypad on modules with a code keypad.
