techem radio frequency smoke alarm 2, Operating Instructions Manual, Page: 14 / 218

14
OPERATING INSTRUCTIONS - RADIO FREQUENCY SMOKE ALARM 2
Product Description
11
33
55
22
44
Optical smoke alarm (SA) to protect private accommodation units in residential buildings.
1
Casing
4
Environmental monitoring with 3 sensors
2
Red LED
5
User key
3
Optical interface
Brief overview: What to do if ...
In the following table we present important signals of the smoke warning alarm and
explain how to act in which cases. - All steps are explained in detail (see Column 4: What
must I do next?).
Signal tones Optical display Deactivate signal
tones What must I do next?
Loud alarm tone The red LED flashes Press the user key See Chapter "Function
method”
2 short quiet signal
tones every 10 minutes Red LED flashes
2x every 30 sec.. Press the user key
See Chapter
"Surroundings monitor”
3 short quiet signal
tones every 5 minutes Red LED flashes
1x every 5 sec.. Press the user key See Chapter
"Fault/Damage"