TCR-1002 HF RECEIVER
Rev. A
– 6/4/2012
17
Command Range
Description
MAnn.nn
0.01 – 2 dB/ms
AGC Attack Rate
Set AGC user mode Attack Rate in dB/ms.
Command Range
Description
MDnnn
1 – 1000 dB/s
AGC Decay Rate
Set AGC user mode Decay Rate in dB/s.
Command Range
Description
MHnn.n
0.1 – 10 secs
AGC Hang Time
Set AGC user mode Hang time in seconds.
Command Range
Description
#
—
Dump AGC State and Restart AGC Process
Command Range
Description
TM
Query the Programmed AGC Settings
Command Range
Description
On
0 – 9
Noise Reducer and Auto Notch Filter. Range is from 0 (off)
to 9.
Command Range
Description
P±n.nnn
±2.0 kHz
Passband Tuning
Allows setting Passband Tuning. This feature is available in
CW and SSB modes, and shifts the filter's center frequency
without affecting the receiver's operating frequency or BFO.
Command Range
Description
Qnnn
0 – 150
Squelch Threshold
Allows setting Squelch control. Entry of 0 represents
Minimum threshold (open squelch) and 150 represents
maximum threshold. This corresponds to (-140 to +10
dBm).
