Tech4o NORTHSTAR CW3 Instruction Manual Download Page 1

DA

TE

COMP

.

TIME

DA

Y

DA

TE

COMP

.

TIME

DA

Y

CW3 Features:

Congratulations on the purchase of your Tech4o  NorthStar CW3. Please read these 
instructions and save for future reference. Developed with advanced sensor technology, 
this watch provides:

• analog and digital timekeeping
• digital compass
• digital calendar

For best performance, we 
recommend that you:

• Avoid exposing the watch to 

extreme conditions for extended 
periods

• Avoid rough use or severe impacts
• Clean with a soft damp cloth
• Keep watch away from magnetic 

fields such as mobile phones, 
speakers and motors

• Store in a dry place

Digital Features:

 
 

TIME [ T 

]   Selects the display and settings - current time (hour, minute)

   

 

 

 

            current time (seconds) 

 

COMP [ C ]  

Selects/sets the compass mode 

 

 

DAY [ DY ]   

Selects/sets the day of week 

 

 DATE [ DT ] 

Selects/sets date

Digital Functions: Major Function Map

2 sec

2 sec

2 sec

10 sec

Compass Mode

Day of the Week

Date

Time

Seconds

Analog Mode

[DT]

[ T ]

[ T ]

[C]

[DY]

Arrow

Digital Display

 
When in the analog mode, you 
can easily activate the digital 
display

• Press [ T ]  to enter the 

digital time display

• Press [ T ] again for the 

digital seconds display

• After 2 seconds the display 

will revert to analog

Set Digital Time,  

Calendar and Format:

• In the Time or Seconds 

display, Press and Hold [ T ] 
for 2 seconds until the 
"seconds" digits flash

•  Press [ C ] to navigate to 

the setting that you wish to 
change. See navigation 
chart at right

• When the setting you wish to change flashes, Press [ DY ] to raise the 

value. Note: If you Press and Hold the button, the rate of change is faster

• When in "Seconds" mode, Press [ DY ] to reset seconds to zero
• Press [ DY ] to switch between formats ( time, Date )
• When setting is complete, Press [ DT ] to confirm and return to the 

previous display

Digital Date

When in the analog mode, 
Press [ DT ] to activate the 
Date display. It will display 
for 2 seconds
 

Digital Day of Week

When in the analog mode, 
Press [ DY ] to activate the 
Day of Week. It will display 
for 2 seconds

Set the Analog Watch

• Gently pull the crown out 

until it clicks

• Turn the crown in either 

direction until you to reach 
correct time

• Push the crown back to its 

original position on the case

Set Time

Click

12 Hour Format

Current Time

Current Seconds

24 Hour Format

[ T ]

Time

Seconds

Second

Minute

Hour

Year

Time 

Format

[DY]

[ T ]

Hold [DY]

Hold [ T ]

Press [ DT ]
or 1 Min.

Date 

Format

Date

Month

Increase
Number

Increase
Number
Faster

Day of Week

Sunday

Monday

Friday

Tuesday

Wednesday

Thursday

Saturday

Month Day

Day Month

Direction 

of Travel

Digital Compass Watch

Caution:

 Accurate readings will be 

compromised when used near 
magnetic fields, mobile phones, 
speakers, motors, electrical appliances 
and inside a moving vehicle or a 
ferroconcrete building. 

Watch may need to be calibrated for 

declination

 

Perform calibration when:

 

• First time of use     

 

• Declination angle has changed

 

• The battery has been replaced

NORTHSTAR CW3

Hour Hand

DATE

TIME 

Seconds Hand

Minute Hand

COMP

Crown

DAY

DA

TE

COMP

.

TIME

DA

Y

[C]

[C]

[C]

[C]

[C]

[C]

[C]

Reviews: