1.1
Installation Instructions for
Tigris Mirror Oval Recessed
700BCTIGOR24_
1
920BCTOVRG9
G
P
I
:
ENERAL RODUCT NFORMATION
This product is suitable for indoor locations only.
This product can be dimmed with a standard incandescent
dimmer.
The wall cavity where the Tigris Mirror will be installed must
be a minimum of 3.5" deep. Some modification to the studs
may be required.
Bring 120 Volt power supply to the mirror in accordance
with local electrical codes.
Metal bar expansion range is 24" - 42".
This instruction shows a typical installation.
C AUTION — RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURN THE POWER TO THE
ELECTRICAL BOX OFF.
B
C
ATH
OLLECTION
Install the Hardware
Use the provided template (22.5" x 32.5") to mark the
center and outline of the mirror on the wall.
Cut out the marked outline on the wall.
If required, make any necessary modifications to the
wall studs.
1A
Center the metal bar vertically in the oval cut out.
Extend the metal bar (maximum 42") so that the ends
touch the side studs.
MIRROR OUTLINE
METAL BAR
OVAL CUT OUT
SIDE STUD
CENTER POINT
1
2
3
22.5"
32.5"
1
2
1B
4
5
4
5
5
