Tech Controllers EU-297 v3 User Manual Download Page 3

EU-297  

 

 

I.

 

SAFETY 

Before using the device for the first time the user should read the following regulations carefully. Not obeying the rules 
included in this manual may lead to personal injuries or controller damage. The user’s manual should be stored in a safe 
place for further reference. 

 In order to avoid accidents and errors, it should be ensured that every person using the device has familiarized themselves 
with the principle of operation as well as security functions of the controller. If the device is to be sold or put in a different 
place,  make  sure  that  the  user’s  manual  is  stored  with  the  device  so  that  any  potential  user  has  access  to  essential 
information about the device. 

The manufacturer does not accept responsibility for any injuries or damage resulting from negligence; therefore, users 
are obliged to take the necessary safety measures listed in this manual to protect their lives and property. 

       

WARNING 
 
 

 

High  voltage!  Make  sure  the  regulator  is  disconnected  from  the  mains  before  performing  any  activities 
involving the power supply (plugging cables, installing the device etc.) 

 

The device should be installed by a qualified electrician. 

 

The regulator should not be operated by children. 

 

WARNING 

 

 

The device may be damaged if struck by a lightning. Make sure the plug is disconnected from the power 
supply during storm. 

 

Any use other than specified by the manufacturer is forbidden. 

 

It is recommended to periodically check the condition of the device. 

 
 

Changes  in  the  merchandise  described  in  the  manual  may  have  been  introduced  subsequent  to  its  completion  on 
09.02.2021. The manufacturer retains the right to introduce changes to the structure or colours. The illustrations may 
include additional equipment. Print technology may result in differences in the colours shown.  

 

We are committed to protecting the environment. Manufacturing electronic devices imposes 
an obligation of providing for environmentally safe disposal of used electronic components 
and  devices.  Hence,  we  have  been  entered  into  a  register  kept  by  the  Inspection  for 
Environmental Protection. The crossed-out bin symbol on a product means that the product 
may not be disposed of to household waste containers. Recycling of waste helps to protect 
the environment. The user is obliged to transfer their used equipment to a collection point 
where all electric and electronic components will be recycled. 

 

 

 

Summary of Contents for EU-297 v3





















Reviews: