EU-293 User manual
17
A
– pre-programmed change from economical temperature to comfort temperature
Activating this function means that at the time of pre-programmed change of the pre-set temperature determined by the
schedule, the current room temperature will be close to the desired value.
In order to activate this function, press MENU until Optimum start settings
appear. Use the buttons
to activate/deactivate the function.
Press MENU to confirm and move on to the next parameter or press EXIT
to confirm and return to the main screen view.
4.8.
AUTOMATIC MANUAL MODE
This function enables manual mode control. If this function is active (ON),
the manual mode is disabled automatically when a pre-programmed
change resulting from the previous operation mode is introduced. If the
function is disabled (OFF), the manual mode remains active regardless of
the pre-programmed changes.
4.9.
WEEKLY CONTROL
This function is used to change the current weekly control program and edit the weekly programs.
HOW TO CHANGE WEEKLY PROGRAM NUMBER
When weekly control is enabled (see: VII.2. Operation modes) the current
program is activated. In order to choose the program number, press
MENU until weekly program settings appear on the screen.
By pressing and holding MENU button the user opens up the program
selection screen. Each time the user holds the MENU button, the program
number changes. When the desired number appears on the screen, press
MENU – the controller returns to the main screen view and the selected
program number is set.
Room temperature -
OPTIMUM START ON
Room temperature -
OPTIMUM START OFF
weekly program number
Summary of Contents for EU-293 B v3
Page 1: ...EU 293 User manual 1 EU 293v3...
Page 24: ...TECH 24...
