LEVEL
BLEND
MID
CHARACTER
DRIVE
LOW
PHA
NTO
M
& G
ROU
ND
CON
NEC
T
+10
dB
1/4
“
INP
UT
OUT
PAR
ALL
EL
OUT
PUT
-20d
B
XLR
BITE
HIGH
POWER REQUIREMENTS
*
Operable with phantom power supply, minimum 24V DC regulated,
however, 48V DC regulated is recommended in order to illuminate LED.
*
Utilizes standard 9V alkaline battery (not included). To install, simply remove
door cover. (NOTE: The Input activates battery.To conserve energy, unplug
when not in use.) Power Consumption: approx. 6mA.
*
USE
DC POWER SUPPLY ONLY!
Failure to do so may damage the
unit and void warranty. DC Power Supply Specifications:
-9V DC regulated or unregulated, 100mA minimum;
-2.1mm female plug, center negative (-).
Optional factory power supply is available: Tech 21 Model
#
DC2.
WARNINGS:
* Attempting to repair unit is not recommended and may void warranty.
* Missing or altered serial numbers automatically void warranty. For your own
protection: be sure serial number labels on the unit’s back plate and exterior
box are intact, and return your warranty registration card.
ONE YEAR LIMITED WARRANTY. PROOF OF PURCHASE
REQUIRED. Manufacturer warrants unit to be free from defects in materials
and workmanship for one (1) year from date of purchase to the original pur-
chaser and is not transferable. This warranty does not include damage resulting
from accident, misuse, abuse, alteration, or incorrect current or voltage. If unit
becomes defective within warranty period, Tech 21 will repair or replace it free
of charge. After expiration, Tech 21 will repair defective unit for a fee.
ALL REPAIRS for residents of U.S. and Canada: Call Tech 21 for Return
Authorization Number. Manufacturer will not accept packages without
prior authorization, pre-paid freight (UPS preferred) and proper insurance.
FOR PERSONAL ASSISTANCE & SERVICE:
Contact Tech 21 weekdays from 9:00 AM to 5:00 PM, EST.
MADE IN THE U.S.A.
T: 973-777-6996 • F: 973-777-9899
E: [email protected] • www.tech21nyc.com
©2013 Tech 21 USA, Inc.
OWNER’S MANUAL
