2. General Description
2016-04
IFU for Infinite 200 PRO No. 30052730 Rev. No. 1.6
15
2.2
Software
The Infinite 200 PRO is delivered with the
i-control
software, for operating the
instrument and includes an online-help file and a printed Instructions for Use. The
software is formatted as a self-extracting archive on CD-ROM. (For information
about the system requirements, refer to the Instructions for Use for the i-control
software. The Instructions for Use for the i-control can be found on the software
CD.)
For advanced data reduction, the
Magellan
software can be used to control the
Infinite 200 PRO. Magellan offers all functionality for compliance with the FDA
regulation 21 CFR part 11 for electronic records and signatures (for more
information, contact your local Tecan representative).
2.3
Injectors (Optional)
The Infinite 200 PRO can be optionally equipped with an injector module
consisting of one or two syringe pumps (XE-1000, Tecan Systems) located in a
separate box, which feed one or two injector needles.
The injector needles are designed to inject liquid in any SBS-conform microplate
well types, in which the well-size is equal to or larger than an SBS standard 384-
well plate.
Figure 3: Injector-box with bottle holders
2.3.1
Injector Measurement Modes
The injectors of the Infinite 200 PRO can be used with the following measurement
modes:
•
Fluorescence Intensity top and bottom
•
Time Resolved Fluorescence
•
Absorbance
•
Flash Luminescence
•
Glow Luminescence
•
Dual Color Luminescence
As the measurement position is not the same as the injector position, a short time
delay (approx. < 0.5 s) between injection and reading occurs.
For details on how to set up a measurement with injectors, please refer to chapter
5.10.5 Injector.
