TECALEMIT TEC 4000, Installation, Operation And Maintenance Instructions

Page: 7 / 24

Lower the hoist platform until the vehicle is fully
supported by the wheels-free beams. Check safety
at all pickup points and column hooks.
30.Raise the hoist to unload the column hooks.
Remove the adaptor pads, etc. Check the floor
area beneath hoist is clear of people and
obstructions. Disengage the hooks and lower the
hoist to the floor. Remove the vehicle.
The hoist is now ready for operation
OPERATING INSTRUCTIONS
To raise hoist
1. Park the vehicle centrally on the hoist. Stop the
engine and apply the parking brake.
2. Place chocks in front of and behind the wheels.
Manual chocks should be used on at least one
wheel.
3. Check the hoist area is clear of people and
obstructions, then raise hoist to desired height for
working on the vehicle.
4. On the wheels-free hoists, engage the
crossmember interlock pins.
5. Lower the hoist on to the column hooks and check
engagement of hooks visually. Turn the main switch
to the horizontal “Off” position before commencing
work.
To lower hoist
1. Check the floor area beneath the hoist is clear of
people and obstructions.
2. Raise the hoist until the column hooks are free.
3. Disengage the column hooks and lower hoist to the
floor.
4. Remove the wheel chocks, check the driveway is
clear, then drive the vehicle off the hoist.
Page 6