Cleaning and general operating instructions
1. Unpack the Milkmate 2005 and place it on the counter.
Make sure that there is no other sources of heat
close to the machine other than the Espresso machine.
Allow 4"of clearance around the unit for air circulation.
2. MilkMate 2005 must be left on to cool for at least
3 hours before anything is placed inside the cooler.
If additional cooling is need add 8-10 oz of water to
create a sugar bath.
3. MilkMate 2005 must be cleaned daily with soap
and water. The cleaning instructions must comply with the
local health codes.
4 Every three months, the fins of the units should be blown
with compressed air to eliminate dust accumulation.
The MilkMate is designed to hold pre-cooled products
at 40 degrees Fahrenheit At an ambient temperature of
75 +/- 2 degrees or 24 d/- 1C
6. The Milkmate should be left on all the time 24-7days.
Call 1-800-769-2395
Email: [email protected]
For online cleaning and installation instruction go to:
http://espressomilkcooler.com/instructions/Cleaning-and-general-
operating-instructions-French-English.pdf
