9
www.TEC-electronics.ru
TEC-63062-1 AutoCAN-Fv6
№
Function
Description
19
Transmission
Condition
A constant level signal is formed if the transmissionhandle is set to the pre-
programmed position (P, R, N, D 1). For robotized transmission, the following
positions can be programmed: R, N, D 1. For mechanical transmission, only
R position is available.
20
Vehicle moves
A constant level signal is formed if the vehicle speed has exceeded a certain
threshold value (this value varies from vehicle to vehicle, but lies within 5 – 10
km/h).
21
Front parking sensors
activation
A constant level signal is formed for activating the front parking system
sensors
22
Rear parking sensors
activation
A constant level signal is formed for activating the rear parking system sensors.
23
Parking Distance
Control System LED
output
It is used for indicating the PDC system condition.
• If the parking sensors work according to Activation on rear gear or Activa-
tion on rear gear with priority of switching off algorithm, the LED is ON
when the sensors are active.
• If the parking sensors work according to Activation on speed, the LED is
ON when the sensors are not active.
24
Motion speed
A pulse signal is formed with pulse sequence frequency proportional to the
vehicle speed. 1 imp/sec corresponds to a speed of 1 km/h. The signal is
designed for determining estimated and not the exact speed.
25
Brake
A constant level signal is formed with the brake pedal pressed.
26
Handbrake
A constant level signal is formed when the vehicle is put on the handbrake.
27
External lights
A constant level signal is formed with the external lights on.
28
Timer Channel
(Comfort)
A constant level signal is formed within a certain time (from 10 to 60 sec.)
after arming the vehicle. The time is set in 10-second intervals.
29
Vehicle distance run
A pulse signal is formed with pulse sequence frequency proportional to the
vehicle distance run. 1imp/sec corresponds to 5 meters run
30
Right turn signal
A pulse signal is formed with pulse sequence frequency proportional to pulse
frequency of the vehicle right turn signal.
31
Left turn signal
A pulse signal is formed with pulse sequence frequency proportional to pulse
frequency of the vehicle left turn signal.
32
Upper beam
A constant level signal is formed when the upper beam is on.
33
Lower beam
A constant level signal is formed when the lower beam is on.
34
Rear fog lights
A constant level signal is formed when the rear fog lights are on.
35
Seat belts
A constant level signal is formed if any of the preprogrammed seat belts is
fastened.
36
Driver/passenger
presence sensor
A constant level signal is formed if there is a driver or a passenger
(pre-programmed).
37
Engine assistance
heater switching ON
A constant level signal is formed according to the engine assistance heater
operation algorithm (taking into account temperature, engine rpm, ignition).
38 Right turn switch
status
A constant level signal is formed for the time the right turn is on.
39 Left turn switch status
A constant level signal is formed for the time the left turn is on.
