5
www.TEC-electronics.ru
TEC-63062-1 AutoCAN-Fv6
Controller Hardware Functions Programming
Programming is carried out as per Controller Hardware Functions Configuration Table (Menu 1).
Table 1. Controller Hardware Functions Configuration (Menu 1)
№
Option Description
Setting range/
default
Note
1
Vehicle model
- / -
SeeInterfacing the Controller toa Vehicle Section
2
Factory alarm control
- / Enabled
LED is ON - the factory alarm control is enabled.
LED is OFF - the factory alarm control is disabled.
3
Sequential Central Lock
deactivation
- / Disabled
LED is ON - the function is enabled.
LED if OFF - the function is disabled
4
Automatic windows closing
(Comfort function)
- / Enabled
LED is ON - the function is enabled.
LED if OFF - the function is disabled.
5
Timer Channel function
operation time (Comfort)
1-6 / 3
From 1 to 6. Unit value is equal to 10 seconds.
6
Alternate Central Lock
control algorithm via output
no. 3
1-3 / -
1 – single-wire,pulse, negative
2 – single-wire,pulse, positive
3 – single-wire,pulse, negative (when Central Lock status is
not available)
7
Alternate Hazard Lights
control algorithm via output
no. 2
1-5 / -
1 –pulse, negative
2 – status, negative
3 – pulse, positive
4 – status, positive
5 –negative,lamp control
8
Parking Distance Control
(PDC) system algorithm
1-3 / 1
1 - Activation on rear gear
2 - Activation on speed
3 - Activation on rear gear with priority of switching off
9
PDC control button
- / -
The following buttons can be used:
– CAN-bus «visible»
– analogue, steering wheel
– positive or negative. Connected to the external
programmable digital input (positive or negative, see
Programmable Input Functions Table).
10 Central lock activation
when motion starts
- / Disabled
LED is ON - the function is enabled.
LED if OFF - the function is disabled.
11
Central lock deactivation
when turning the ignition
off
- / Disabled
LED is ON - the function is enabled.
LED if OFF - the function is disabled.
12
Central lock deactivation
when turning the ignition
off
- / Disabled
LED is ON - the function is enabled.
LED if OFF - the function is disabled.
