15
www.TEC-electronics.ru
TEC-63062-1 AutoCAN-Fv6
Factory Reset
The controller has the procedure for resetting all the programmable settings, which is used for
erasing the vehicle model settings from the non-volatile memory and restoring all the other program-
mable option settings to the factory ones.
For factory reset:
• Disconnect the controller from power supply and CAN bus.
• Press and hold the built-in button.
• While holding the built-in button, supply the power to the controller (the CAN bus must remain
disconnected). The controller will give intermittent light signals.
• Disconnect the power supply and release the built-in button.
Table 5. Technical Data and Operating Conditions
Characteristic
Value
Power supply voltage, V
9 ... 15
Max. current consumption in operating mode, mA
750
Max. current consumption in standby mode, mA
1
Operation temperature, °C
– 40 ... + 85
Storage temperature, °C
– 40 ... + 85
Maximum relative air humidity, %
95
Delivery Set
Description
Number
1
Central unit
1 pc.
2
Wire harness with a connector
1 pc.
3
Technical Description
1 pc.
4
Package
1 pc.
Product warranty period is 3 years from the date of purchase if installed in accordance with the
installation instructions. Please contact your vendor company upon any warranty case.
Manufactured by TEC Electronics Ltd.
Certificate of Conformity No. C-RU.AG92.V.32319
The product complies with the requirements of the Technical Regulations:
Technical Regulations on Safety of Wheeled Vehicles
(the Russian Federation Government DecreeNo. 720of 10/09/2009)
