TEC AP160N-10K, User Manual

Page: 9 / 33

14
Figure 3-6B: 10K-PDU Rear Panel ( no parallel Card, with maintenance bypass)
3.4 UPS Front Panel
This section shows the front panel of the Online R/T UPS. The Online
series have the same LCD panel and the same control button.
Figure 3-7: The Online R/T UPS Front Panel
15
3.5 Rack mount Setup
CAUTION:
The cabinet is heavy, so:
1) Remove the battery tray from the UPS before lifting.
2) Lifting the cabinets into the rack requires a minimum of two
people.
CAUTION: Removing the batteries requiered precautions, which
should be performed or supervised by personnel with knowledge of
batteries . Keep unauthorized personnel away from batteries.
CAUTION: If installing an EBM(Extended Battery Module), install
the EBM directly below the UPS.
3.5.1 Install the UPS and EBM (Extended Battery Modules) in
a rack:
1. Open the front panel and put it above the UPS.
Figure 3-8. Open the front panel (left: 6K Model, right: 10K Model)
2. Remove the battery protection plate:
Figure 3-9. Removing the Battery Protection Plate