Sayfa
6
/
22
installation, radiators and valves should be checked and the air in the installation
should be emptied. This all needs to be done by the authorized person.
*According to the weather conditions of the region, it is recommended to use 1/3
portion antifreeze against corrosion and freezing.
4.3.3 Flue pipe connection
We recommend the use of a stainless steel flue pipe for the flue connection. The pellet
stove can operate in conjunction with the existing multiple chimneys. In addition, the
stove should not be connected at places such as the aspirator chimney and ventilator.
The chimney can be given directly out of the pellet stove at a short distance, or it can be
connected to the existing chimney at short distance.
ATTENTION !!!
THE PIPE AND ELBOWS USED UP TO THE CHIMNEY OUTPUT AND INPUT NEEDS
TO BE THE SAME DIAMETER. BY THE INPUT OF THE CHIMNEY A REDUCTION
MUST BE USED. MAXIMUM 4 METERS PIPES AND 2 ELBOWS NEEDS TO BE USED.
PIPE JOINTS SHOULD BE TAPED TO CONNECTOR OR ALUMINUM BAND.
