(rev1 June 2016)
Mounting instructions for
ThermalCapture 2.0
Thank you for buying our product. The following instructions will guide you through the
process of mounting ThermalCapture 2.0 to a TAU core. Please read these instructions
carefully before you begin.
Step 1: Remove the VPC Module
If your TAU Core has a VPC-module, please remove it by loosening the marked screws.
The VPC-module and the two screws are not needed in the following process and can be
put away.
Step 2: Remove the back cover
Remove the back cover by loosening the marked screws.The back cover and the four
screws are not needed in the following process and can be put away.
Caution
: This will also release the main-board of the Tau core. It will be kept in place only
by its internal wiring. Do not apply strong forces to the main-board at this and the following
step. The internal wiring pulls the main-board down at the upper side of the TAU core, so
that the main-board moves a little bit up at the other side when the screws are released.
