Teamline 5250
Page 13
Advanced Settings
Configuring the proxy server (optional)
Optionally, you can use the web interface to configure a proxy server:
1. If there is a proxy server for your deployment, select
Configure proxy server
.
2. Select
Automatically detect settings
or
Manual configuration
.
3. If you are using a setup script to configure the proxy server, enter the
location of the script in the
Configuration script address
field.
4. If the proxy server requires a user name and password, enter the details in
the
Username
and
Passsword
fields.
Changing system settings
To change the Teamline system configuration:
1. In the Maestro
Meeting Rooms
page, click
Manage
next to the relevant
room.
2. In the Info area, copy the unlock password.
3. In the Teamline configuration web interface, paste the password in the
Unlock
field.
4. Click
Unlock
.
Using a static IP address
By default, the Teamline system uses DHCP to acquire an IP address. If
required, you can configure the system with a static IP address. In
networking
,
toggle
DHCP
off and tap to enter the
IP address
,
netmask
, and
gateway
addresses.
Note:
If the address entered is invalid, you are not notified on the
touchscreen. Ensure you enter the correct details.
Advanced Settings
Configuring EAP authentication
To deploy the Teamline system into a network that is using 802.1x with EAP-TLS
authentication:
1. In a browser, enter the Teamline system IP address in the address bar. The
Teamline configuration page is displayed.
2. Select
Configure 802.1x
:
