Teamline 5250
Page 12
Configuring Teamline 5250
Configuring Teamline 5250
Before you can use the Teamline system, go to the Teamline configuration
web interface to:
n
Enter the Quick Connect code to connect the Teamline system to the
Maestro management platform
n
Configure a proxy server (if required)
To access the configuration web interface:
1. Tap
twice on the touchscreen controller to view settings, then tap
networking
to view the IP address.
2. In a browser, enter this IP address in the address bar. The configuration web
interface is displayed:
3. Select
Hosted
if your system is managed by StarLeaf. Select
On-premise
if
you are using a local version of Maestro that has been installed by StarLeaf
on your local network.
Connecting the system to Maestro
To connect the Teamline system to Maestro:
1. Open the Maestro site. If you haven't created a new room for your Teamline
system, see the Maestro management platform guide on the Teamline
Knowledge Center.
2. In the Maestro
Meeting Rooms
page, click
Manage
next to the meeting
room to view the Quick Connect Code. Enter this code in the Teamline
configuration web page.
3. Click
Save changes
.
