Team SILK FXB630, Instruction Manual, Page: 56 / 76

FXB630 Flange Facing and Grooving Machine
55
8.5 TOOLPOST ASSEMBLY
Refer to Fig. 28.
ITEM
No.
PART No. QTY DESCRIPTION
1 FXB 0501 1 RIGHT ANGLED DRIVE UNIT
2 FXB 0502 1 SWIVEL PLATE
3 FXB 0503 1 TOOLPOST
4 FXB 0504 1 TOOLPOST FEED NUT
5 FXB 0505 1 LEADSCREW
6 FXB 0506 1 TOOLPOST KNOB
7 FXB 0507 1 DRIVE SHAFT
8 FXB 0508 1 THRUST WASHER
9 FXB 0509 1 TOOLPOST GIB STRIP
10 CP 0162 1 TOOL CLAMP
11 CP 0315 1 TOOLPOST STOP
12 FV 0212 1 12T HELICAL GEAR
13 FV 0211 1 12T HELICAL GEAR
14 FV 0210 1 THRUST WASHER
15 --- 1 3/8"ID x 9/16"OD x 3/4"OD FLG x 1/2LG
16 --- 2 CIRCLIP
17 --- 2 SPRING PIN
18 --- 2 M4 x 6 LG SOC SET SCREW CUP POINT
19 FXB 0511 1 MODIFIED FLANGED OILITE BUSH
3/8"ID x 9/16"OD x 3/4"OD FLG x 1/4LG
20 --- 6 M6 HEX NUT
21 --- 1 M6 BRIGHT WASHER
22 --- 1 M12 x 50 LG SOC CAP SCR
23 --- 4 M6 x 12LG SOC CAP SCR
24 --- 2 M5 x 12LG SOC CAP SCR
25 --- 1 M10 x 30 LG SOC CAP SCR
26 --- 1 M10 x 20 LG SOC SET SCR DOG POINT
27 --- 1 M6 BRIGHT WASHER
28 --- 1 M5 x 10 LG CSK SOC SCR
29 --- 4 M6 x 20 LG SOC SET SCR CUP POINT
30 --- 1 M6 x 25 LG SOC CAP SCR
31 FXB 0510 1 MODIFIED MYFORD DIAL