Team SILK AX14-60, Instruction Manual

Page: 18 / 92

AX14-60 Flange Facing Machine
17
SECTION 3
SAFETY INFORMATION
3.1 WARNINGS AND CAUTIONS
GENERAL:
ALL SAFETY PROCEDURES MUST BE OBSERVED AND STRICTLY
ADHERED TO WHEN INSTALLING, USING, MAINTAINING AND
SERVICING THIS EQUIPMENT.
ONLY TRAINED AND COMPETENT PERSONNEL SHOULD INSTALL,
USE, MAINTAIN AND SERVICE THIS EQUIPMENT.
ENSURE AN EMERGENCY STOP IS ALWAYS WITHIN REACH OF THE
OPERATOR.
INTENDED USE OF THIS EQUIPMENT:
THIS EQUIPMENT IS FOR USE BY PROFESSIONAL, TRAINED
PERSONNEL WORKING IN AN INDUSTRIAL ENVIRONMENT.
THIS EQUIPMENT IS INTENDED FOR USE ON METALS AND
ANALOGOUS SUBSTANCES.
THIS EQUIPMENT IS NOT INTENDED FOR USE ON WOOD, PLASTIC OR
SIMILAR ANALOGOUS SUBSTANCES.
USE OUTDOORS:
THIS EQUIPMENT SHOULD NOT BE USED DURING SEVERE WEATHER
CONDITIONS.
PERSONNEL SHOULD NOT OPERATE THIS EQUIPMENT IN WEATHER
CONDITIONS WHICH MAY GIVE RISE TO THE FOLLOWING:
- INADEQUATE VISIBILITY
- THE BUILD-UP OF ICE, SNOW, WATER, SAND OR DUST ON
PLATFORMS, LADDERS, CONTROLS, VISUAL INDICATORS,
MOVING PARTS, ETC.
- RISK OF INJURY DUE TO STRONG OR GUSTING WINDS
THIS EQUIPMENT SHOULD BE SUITABLY PROTECTED FROM ALL
SEVERE WEATHER CONDITIONS.