www.teamorion.com 9
FEATURES
• Designed for on-road and off-road 1/10 scale cars
• Splash proof
• Forward and reverse function
• 4 pole brushless motor
• 45A ESC
• High power built-in BEC system
• Easy set-up via the setup button located on the switch
• Adjustable parameters
• Multiple protection systems: battery low voltage cut-off,
overheating, radio signal loss, stuck motor
INSTALLATION - CONNECTION
ATTACHMENT: Attach the dDrive to the car’s motor mount
using 3mm metric screws. If a motor was already fitted to
your car, you will likely be able to re-use the same screws.
Adjust the motor so that there is about 0.5mm play between
the gear and pinion.
WARNING! If the motor screws are too long, you risk
shorting and damaging the motor!
GEARING: You can use the original pinion that came with
your car. However, you may also need to change the gearing
to get optimal performance. If the dDrive overheats use a
smaller pinion, if the car is slow and the motor temperature
is low, you can use a bigger pinion to increase performance.