●
Battery calibration
- Use a multimeter to
measure and input the voltage
●
RTC battery
- shows the actual RTC battery
voltage
●
Serial port
- not yet supported
●
Max. bauds
- Specify communication baud
rate between the T2 and the build-in Crossfire
modul,
must be set to 400000
●
RAS
- not used by the Tango 2
●
Debug
- shows the raw values of the switches
and keys
Version
Current build and version of the OpenTX firmware
●
As the TANGO II is branch of the OpenTX
codebase it needs it specific build
●
Firmware Options
- shows the included
software modules
Calibration
Re-perform the gimbal stick calibration
●
The calibration can be entered on
page 6
[CALIBRATION]
●
If the initial calibration was incorrect, re-do it
by pressing the Enter-button and follow the
instructions
●
IMPORTANT
: on the final step, do NOT move
the sticks to their combined extremes (e.g.
top-left, top-right, bottom-left, bottom-right).
Move the sticks in a “+” pattern
16
Summary of Contents for TBS TANGO 2
Page 4: ...FAQ 4...
