INSTALLATION & USER MANUAL
CCU3
CENTRAL
CONTROL UNIT
Page 1: ...INSTALLATION USER MANUAL CCU3 CENTRAL CONTROL UNIT ...
Page 2: ...the control The RS1 rain sensor is supplied complete with 5 metres of cable If this is not sufficient the cable can be extended to a maximum of 50 metres using 3 x 0 5mm cable unit you must pass the cables through the grommets and insert the rubber cord for tighter seal 1 2 3 4 5 6 LIVE 2 CLOSE LIVE 1 OPEN LIVE NEUTRAL NEUTRAL 7 8 9 LIVE 1 OPEN LIVE 2 CLOSE COM 10 11 12 13 14 WHITE BLUE YELLOW FUS...
Page 3: ...for 10 15 seconds until the red LED flashes 2 PRESS and HOLD the LEARN button on the CCU3 until the buzzer makes a short sound then release Turn on the power to the CCU3 control unit 3 Within a few seconds press the STOP button on the remote transmitter 4 The buzzer will sound twice to confirm the remote transmitter has been programmed 5 1 Open Front Back 2 Stop 3 Close 5 Channel Display 6 Channel...
Page 4: ...uator will fully close Open Press the Open button 1 on the remote and the actuator will fully open REMOTE CONTROL Stop If the actuator is opening press the Close button to stop the actuator in mid position Or if the actuator is closing press the Open button to stop the actuator Close Press the Close button 2 on the remote adn the actuator will fully close For multi channel remotes first select the...
