background image

safety instructions

Read Instructions

All safety and operation instructions should be read 
before operating this TeachLogic product. 

Retain Instructions

Safety and operating instructions should be kept 
for future reference.

Water & Moisture

This product should not be operated near water.

Heat Environment

Do not subject this product to excessive heat 
conditions.

Power Source

This product must be connected to an AC power 
source per the voltage input specified and marked 
on the power supply.

Power Cord Caution

Power cable should be routed clear of foot traffic 
and supported clear of kinking or abrasion.

Object Protection

Locate the operating unit so it will not be subjected 
to falling objects or water entry. 

Internal Service

User should not attempt to service this product. 
All internal service must be accomplished by a 
qualified technician.

Electric Shock

Do not adapt or modify the AC power plug thus 
lifting the earth ground connection.

certifications

Listed

US

CA

TeachLogic systems are 
manufactured using lead-
free processes and are free 
of materials harmful to the 
environment. They conform 
to the most stringent new  
European guidelines for 
consumer products (RoHS).

Recycle—Do not dispose 
rechargeable batteries in 
trash. Actually it is unlawful 
to do so in CA, NY & ME.

Contact: Earth911.com
                1-800-CLEANUP

Save our resources and 
don’t contaminate.
Go Green  

caution

Summary of Contents for QUANTUM II





















Reviews: