![Teac TN-4D-SE Owner'S Manual Download Page 9](http://html.mh-extra.com/html/teac/tn-4d-se/tn-4d-se_owners-manual_827611009.webp)
EN
G
LI
SH
9
Specifications
Included items
Felt mat × 1
45 RPM adapter × 1
Counterweight × 1
Headshell × 1
Sumiko MM type stereo cartridge (Oyster) preinstalled
Platter × 1
Dust cover × 1
Dust cover hinges × 2
RCA audio cable with grounding terminal × 1
AC adapter (GPE036W-240150) × 1
Owner’s manual (this document, including warranty) × 1
o
Specifications and appearance are subject to change without
notice.
o
Weight and dimensions are approximate.
o
Illustrations in this owner’s manual might differ slightly from
production models.
General
AC adapter power
Input. . . . . . . . . . . . . . . . . . . . . . . . . AC 100 V – AC 240 V, 50/60 Hz
Output. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DC 24 V, 1500 mA
Power consumption
Standby. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 W or less
On (33, 45) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.0 W or less
Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.1 kg (13 1/2 lb)
Operating temperature range . . . . . . . . . . . . . . . . . . . . . . 5°C to 35°C
Dimensions (W × H × D) (including protrusions)
When the dust cover is closed
420 × 117 × 356 mm (16 5/8
"
× 4 5/8
"
× 14 1/8
"
)
When the dust cover is open
420 × 381 × 402 mm (16 5/8
"
× 15
"
× 15 7/8
"
)
When the dust cover is removed
420 × 102 × 356 mm (16 5/8
"
× 4 1/8
"
× 14 1/8
"
)
o
Performance data is specified at 20°C.
Platter
Drive system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Direct drive
Motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DC motor
Rotation speed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 1/3 rpm, 45 rpm
Wow and flutter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.1% or less
SN ratio . . . . . . . . . . . . . . . 67 dB or higher (A-weighted, 20kHz LPF)
Platter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aluminum die-cast
30cm (12
"
) diameter
Tonearm
Tonearm type . . . . . . . . . . . . . . . Static-balanced S-shaped tonearm
Effective tonearm length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223 mm
Tracking force variation range . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0–5 g
Acceptable cartridge weight . . . . . . . . . . . . . . . . . . . . . . . . . . 4.0–13 g
14–23 g
(with the included headshell)
Cartridge
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MM
Output voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.0 mV (1 kHz)
Tracking force . . . . . . . . . . . . . . . . . . 1.5–2.5 g (2.3 g recommended)
Cartridge weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.3 g
Included headshell weight
10 g (including screws, nuts and wires)
o
The need for stylus replacement depends on use conditions,
but we recommend replacement after about 300 hours of
use.
o
Replacement stylus model: Sumiko Oyster replacement stylus
Output voltage
PHONO EQ THRU. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.0 mV (1 kHz)
PHONO EQ ON. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224 mV (−13 dBV)
Output connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RCA