Teac TN-280BT Owner'S Manual Download Page 2

2

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO 
NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE 
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE 
PERSONNEL.

M

The lightning flash with arrowhead in an equilat-
eral triangle is intended to alert the user to the 
presence of uninsulated “dangerous voltage” within 
the product’s enclosure that could be of sufficient 
magnitude to constitute a risk of electric shock to 
persons.

V

The exclamation point in an equilateral triangle 
is intended to alert the user to the presence of 
important operating and maintenance (servicing) 
instructions in the literature accompanying the 
appliance.

WARNING: TO PREVENT FIRE OR SHOCK 
HAZARD, DO NOT EXPOSE THIS APPLIANCE TO 
RAIN OR MOISTURE.

CAUTION

 

o

DO NOT REMOVE THE EXTERNAL CASES OR CABINETS TO 
EXPOSE THE ELECTRONICS. NO USER SERVICEABLE PARTS 
ARE INSIDE.

 

o

IF YOU ARE EXPERIENCING PROBLEMS WITH THIS PRODUCT, 
CONTACT THE STORE WHERE YOU PURCHASED THE UNIT 
FOR A SERVICE REFERRAL. DO NOT USE THE PRODUCT 
UNTIL IT HAS BEEN REPAIRED.

 

o

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE 
OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN 
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

1)  Read these instructions.
2)  Keep these instructions.
3)  Heed all warnings.
4)  Follow all instructions.
5)  Do not use this apparatus near water.
6)  Clean only with dry cloth.
7)  Do not block any ventilation openings. Install in accordance 

with the manufacturer’s instructions.

8)  Do not install near any heat sources such as radiators, heat 

registers, stoves, or other apparatus (including amplifiers) 
that produce heat.

9)  Do not defeat the safety purpose of the polarized or 

grounding-type plug. A polarized plug has two blades with 
one wider than the other. A grounding type plug has two 
blades and a third grounding prong. The wide blade or 
the third prong are provided for your safety. If the provided 
plug does not fit into your outlet, consult an electrician for 
replacement of the obsolete outlet.

10)  Protect the power cord from being walked on or pinched 

particularly at plugs, convenience receptacles, and the 
point where they exit from the apparatus.

11)  Only use attachments/accessories specified by the 

manufacturer.

12)  Use only with the cart, stand, tripod, 

bracket, or table specified by the man-
ufacturer, or sold with the apparatus. 
When a cart is used, use caution when 
moving the cart/apparatus combina-
tion to avoid injury from tip-over.

13)  Unplug this apparatus during lightning storms or when 

unused for long periods of time.

14)  Refer all servicing to qualified service personnel. Servicing 

is required when the apparatus has been damaged in any 
way, such as power-supply cord or plug is damaged, liquid 
has been spilled or objects have fallen into the apparatus, 
the apparatus has been exposed to rain or moisture, does 
not operate normally, or has been dropped.

 

o

The apparatus draws nominal non-operating power 
from the AC outlet with its POWER or STANDBY/ON 
switch not in the ON position.

 

o

The mains plug is used as the disconnect device, the 
disconnect device shall remain readily operable.

 

o

Caution should be taken when using earphones or 
headphones with the product because excessive 
sound pressure (volume) from earphones or head-
phones can cause hearing loss.

IN USA/CANADA, USE ONLY ON 120 V SUPPLY.

CAUTION

 

o

Do not expose this apparatus to drips or splashes.

 

o

Do not place any objects filled with liquids, such as 
vases, on the apparatus.

 

o

Do not install this apparatus in a confined space such as 
a book case or similar unit.

 

o

The apparatus should be located close enough to the 
AC outlet so that you can easily reach the power cord 
plug at any time.

Model for USA

Declaration of Conformity

Responsible party:  
Pioneer & Onkyo U.S.A. Corporation
Address: 22828 Lockness Avenue, Torrance, CA 90501 U.S.A.
Telephone number: 1-201-785-2600
This device complies with Part 15 of the FCC Rules. Operation is 
subject to the following two conditions: (1) this device may not 
cause harmful interference, and (2) this device must accept any 
interference received, including interference that may cause 
undesired operation.

Information

This equipment has been tested and found to comply with the 
limits for a Class B digital device, pursuant to Part 15 of the FCC 
Rules. These limits are designed to provide reasonable protec-
tion against harmful interference in a residential installation. 
This equipment generates, uses, and can radiate radio frequency 
energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio commu-
nications. However, there is no guarantee that interference will 
not occur in a particular installation. If this equipment does cause 
harmful interference to radio or television reception, which can 
be determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of 
the following measures:
•  Reorient or relocate the equipment and/or the receiving 

antenna.

• Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different 

from that to which the receiver is connected.

•  Consult the dealer or an experienced radio/TV technician for 

help.

CAUTION

Changes or modifications not expressly approved by the party 
responsible for compliance could void the user’s authority to 
operate the equipment.

Model for Canada

Industry Canada’s Compliance Statement:
This Class B digital apparatus complies with Canadian ICES-003.

Model for Europe

For European Customers

Disposal of electrical and electronic equipment 
and batteries and/or accumulators

a)  All electrical/electronic equipment and waste batteries/accu-

mulators should be disposed of separately from the municipal 
waste stream via collection facilities designated by the gov-
ernment or local authorities.

b)  By disposing of electrical/electronic equipment and waste 

batteries/accumulators correctly, you will help save valuable 
resources and prevent any potential negative effects on 
human health and the environment.

c)  Improper disposal of waste electrical/electronic equipment 

and batteries/accumulators can have serious effects on the 
environment and human health because of the presence of 
hazardous substances in the equipment.

d)  The Waste Electrical and Electronic Equipment (WEEE) 

symbols, which show wheeled bins that have been 
crossed out, indicate that electrical/electronic equip-
ment and batteries/accumulators must be collected 
and disposed of separately from household waste.
If a battery or accumulator contains more than the 
specified values of lead (Pb), mercury (Hg), and/or 
cadmium (Cd) as defined in the Battery Directive 
(2006/66/EC, 2013/56/EU), then the chemical sym-
bols for those elements will be indicated beneath the 
WEEE symbol.

e)  Return and collection systems are available to end users. For 

more detailed information about the disposal of old electri-
cal/electronic equipment and waste batteries/accumulators, 
please contact your city office, waste disposal service or the 
shop where you purchased the equipment.

Pb, Hg, Cd

Summary of Contents for TN-280BT


















Reviews: