39 |
PowerMax-HP10
PC
Back plate
PowerMax-HP10
5.1 channel
speaker
stereo sound
card
USB cable (E)
6. Connecting Computers (Stereo Sound Cards)
Utilize an USB cable for power source. Connect the USB 5V power
source to the jack USB1 on the back of the 5.1 amplifier box. The
second USB connector USB2 can replace the occupied USB
connector of your computer for other USB devices. In case of
audible interference noise (e.g. with Notebooks) disconnect the
USB cable and install the external power supply.
PC stereo sound cards can be connected to the input AUX of
the amplifier box by a PC audio cable with 3.5mm mini phono
plugs at both ends.
Optionally a 5.1 amplifier/speaker system can be connected to
the pass-through 5.1 front output connectors of the headphone
amplifier. It provides the AUX signal for further playback devices.
For power and signal connection method, please refer to the
picture below.
