Teac Pico-1, User Manual

Page: 20 / 38

52
ENGLISH
The message above will also be shown if the slave disc is of a smaller
capacity than the source disc. In these instances, it is impossible to
copy from the master to the slave disc. If the master disc is scratched,
damaged or unreadable for any reason, the copy process will halt, and
the display will appear as below.
If the slave disc is scratched, damaged or otherwise unwritable, the
display will appear as below.
If master CDs shall be copied which can’t be read or which contain a
copy protection this message appears:
In the event of any of these errors being displayed, pressing the MODE
key will return to the main mode selection menu. Correct the problem,
if possible (replace the offending disc correctly in the disc tray, try again
with a different disc, etc.) before attempting the copy operation again.
3. Modes
Error Error Error Error Error
Master:Bad disc Master:Bad disc
Master:Bad disc Master:Bad disc Master:Bad disc
Error Error
Error Error
Error
Slave:Bad disc Slave:Bad disc
Slave:Bad disc Slave:Bad disc
Slave:Bad disc
Copy failed Copy failed
Copy failed Copy failed
Copy failed
Master:Disc Err Master:Disc Err Master:Disc Err Master:Disc Err Master:Disc Err