51
ENGLISH
At the end the following is shown:
NOTE
There is one other important difference between test write
mode and copy mode. You can interrupt the test write mode
part of the way through the operation without affecting the
slave CD-R/CD-RW media. If you interrupt a copy procedure
part of the way through the operation, the CD-R/CD-RW be-
comes unusable. To interrupt the test write operation, press
and hold down the MODE key. The display will show
Exit
Exit
Exit
Exit
Exit
.
When this is displayed, press the ENTER key. This cancels
the test write process, and the display returns to the initial
status screen. If you press the MODE key while
Exit
Exit
Exit
Exit
Exit
is shown
on the display, the display returns to the test write display
screen.
3.3 Possible Problems When Copying or in Test Write
Mode
If the MASTER or SLAVE drive does not contain a disc, or if the disc
cannot be read by the drive (it is upside-down or badly positioned in
the tray), the display will show
No disc
No disc
No disc
No disc
No disc
.
If the SLAVE drive does not contain a recordable CD-R disc, or a CD-
R disc which has been previously partly recorded, the display will show
Bad disc
Bad disc
Bad disc
Bad disc
Bad disc
.
The standard maximum length of an audio CD is set at 74 minutes.
However, some commercial CDs are recorded with a running time a
little longer than this. If the master audio CD exceeds 74 minutes in
length (or the standard maximum amount of data (650 MB) for a CD-
ROM), the display will show:
3. Modes
Test write
Test write
Test write
Test write
Test write
Complete
Complete
Complete
Complete
Complete
Master:Insuffi-
Master:Insuffi-
Master:Insuffi-
Master:Insuffi-
Master:Insuffi-
cient disc space
cient disc space
cient disc space
cient disc space
cient disc space
