28
6) Take out an ink ribbon from its package
and remove three pads.
4)
Place the ink ribbon with the take-up shaft on
the left and the supply shaft on the right, and
their protrusions facing you and their
openings facing away from you.
5)
Insert the open end of the take-up shaft into
the hole provided in the cartridge (for ease of
work, we recommend holding the shaft by
inserting your index finger into its open end),
and snap the protrusion at the other end of
the shaft into the cut-off in the cartridge.
6)
In a similar way, put the supply shaft into the
ink ribbon cartridge.
7)
Turn the take-up shaft clockwise to take up
ribbon slack.
NOTE
If you perform the next step without taking up ribbon slack, there is a chance that the ribbon might
be broken.
