17
Section 8 : Connections
Printer Cable
CAUTION
For U.S.A. and Canada
The P-55 does not come standard with a power cable.
Use a UL or CSA approved cable, type SJT or SVT, No.18AmG. For cable connector, use one
rated at more than 7A and 125V.
For Europe
The P-55 does not come standard with a mains plug/connector and mains cable.
Use a mains plug conforming to CEE7, a connector conforming to EN60320-1, and a mains
cable conforming to CEE13. The connector must be rated at more than 10A and 250V.
As shipped from the factory, the heater voltage selector switch is set to "100-120V".
Making sure that the shipping materials (three cushions and one heat roller fixing bar) have been
removed, plug the end of the power-supply cable into a wall outlet.
CAUTION
Never switch on power to the P-55 without removing three cushions and the heat roller fixing bar,
or failures may result.
