28
Setting presets
You can store presets for up to 10 DAB stations.
1
In DAB mode, tune in to the station you want to
add as a preset.
2
Press the INPUT SELECTOR knob for three or more
seconds or press the remote control PROGRAM
button.
Display example
Station 1
>SAVE PRESET X
3
Within 10 seconds, turn the INPUT SELECTOR knob
until the desired preset number is shown, and
press the INPUT SELECTOR knob to store the sta-
tion preset.
o
You can also use the up and down (
k
,
j
) buttons on the
remote control to show the desired preset number.
o
The available preset numbers are 0 to 9.
o
Preset numbers currently used are marked with an asterisk
(*).
o
If you do not press the INPUT SELECTOR knob within 10 sec-
onds of selecting the preset, the selection will be canceled.
o
If you store a new station to a preset, the station previously
stored as that preset will be overwritten.
To store more station presets, repeat steps 1 to 3.
Using the DAB menu (cont’d)
STATION ORDER
You can set the order in which stations are listed.
1
When the DAB menu is open, select STATION
ORDER, and press the INPUT SELECTOR knob.
2
Turn the INPUT SELECTOR knob until the desired
setting is shown, and then press the INPUT
SELECTOR knob.
You can select one of the three settings.
ALPHANUMERIC
This is the default order. Stations are listed by name with
numbers first and then alphabetically by station name.
ENSEMBLE
Channels are listed by ensemble name.
VALID
This option will list active stations at the top of the station
list in alphanumeric order, followed by stations that are in
the list but are not available in the current area.
Summary of Contents for NT-503DAB
Page 99: ...99...
