29
EN
G
LI
SH
Adjusting the brightness of the display
Press the DIMMER button to cycle through the follow-
ing brightness settings .
Ordinary brightness
Dim
Very dim
o
When the unit enters standby, the dimmer setting is
reset to ordinary brightness .
Muting the output
Press the MUTE button to temporarily silence the out-
put . Press the MUTE button again to resume output at
the previously set volume level .
o
When the mute function is active, “MUTE” appears on
the display .
o
When the mute function is active, adjusting the vol-
ume will unmute the output .
o
When the mute function is active, changing the
source will unmute the output .
