
14
everyday operation
There are a great many keys to use in different situations. Many of the menu
screens displayed by the TV have reminders as to which keys do what, at the base
of the screen. In addition, many screens have further help available which is dis-
played when the
INFO
key is pressed, as prompted at the bottom right of the
screen.
Pressing the
TV/DTV
key at any time while watching television programmes will
switch the TV set between displaying the digital terrestrial television programme and
its normal analogue television reception.
CHANGING CHANNELS
Hint
The LCN numbers are assigned
by the broadcasters. Because
not all channels are broadcast
and stored by the TV, the chan-
nel list numbers do not run con-
tinuously.
The fifteenth channel in the list,
for example, may not be channel
number 15 but channel number
17.
When you press a number key on
the remote control, a small box ap-
pears in the top left of the screen to
show the entered number. After
each digit is entered, the TV will wait
up to two seconds for the next digit
to be pressed until either three dig-
its have been entered or you do not
press a digit in time. The channel
corresponding to the entered num-
ber in the box will then be selected.
CHANGING CHANNELS
You can select the channel you wish to watch in one of four ways - stepping
through the channel list, selection by number, from the on-screen channel list, and
using the electronic programme guide (EPG).
To move through the channel list, press the
P+
or
P -
keys on the remote
control. Pressing the
P+
key will select the channel next in the channel list. Press-
ing the
P -
key will select the previous channel in the list.
Pressing the
P+
key when the last channel in the list is being viewed will select
the first channel. Similarly, pressing the
P -
key when the first channel is dis-
played will select the last channel in the channel list.
Y
ou can also select the required channel by directly using its channel sort number.
Your TV has two kinds of channel sorting mechanism. Name (Alphabetical) list and
LCN sort.
In alphabetical sort, all stored channels are ordered according to their name, i.e.
letter A first, Z last. In this mode channel list numbers are continuous, and entering
a number using the remote control will directly remove you to that channel. Also
entering a number greater than the number of stored channels will select the last
channel.
Other type of channel sorting mechanism is LCN sort. LCN is the unique number
for every channel in network which is assigned by the broadcaster, to establish a
logical connection between the channel and network. In this sorting mode LCN
number must be entered to select a channel.
50052675-TEAC AK45 IDTV IB-STEREO-3215W-RF-2147 UK-CH-2 SCART-FAV-FSVHS p65
27 09 2004 17:41
14
Summary of Contents for ISDTVF32ST
Page 60: ...60 ...