USB device detected, Please wait...
USB device attached successfull
Just wait a while after the USB disk is detected, another message “USB device attached
successful!” will be shown if this USB disk is mounted successfully.
21
Note:
You can't use any PVR functions at this very moment until the unit finishes the
necessary mounting process.
Note:
The time spent on the mounting process depends on the number of partitions and
the capacity of the disk, it may take several minutes to finish it.
PVR Operations
If the USB disk is partitioned into several volumes, but no FAT32 volume exists, a prompt
dialog will ask user to format one of them into FAT32.
Note:
If you confirmed to format the disk, all data previous stored on the volume will be
erased and can't be recovered. It is recommended that you backup your data and
finish the format process on your PC.
When a USB disk is connected, a prompt message “USB device detected, please wait…” will
be shown at the bottom of screen.
DisK Format
The volume attached can't be
recognized, would you like format
it as FAT32? Please note, all the
date on the volume will be erased
after formatting!
