Teac ER-LXRC1000, Instructions For Use Manual

Page: 9 / 40

9
5-2. Home Screen
a
Status icon
Icon Status
8
Stopped (ready for use)
p9
Record ready
p
Recording
t
Playing back
t9
Playback ready
b
ID
This shows the ID when playing back or recording.
When playback ready, select the ID and press the
ENTER button to conduct an ID search.
o
IDs are consecutive file numbers inside playback
and recording folders. 999 is the highest number
that can be shown.
These do not always match the file name suffixes
(3 digits).
o
The last recorded ID is shown when in a stopped
state.
c
Recording/playback time (COUNT)
When recording, this shows the elapsed time since
recording started.
When playing back or playback ready, this shows
the elapsed time from the beginning of the file.
d
Event mark (MARK)
When recording, this shows the total number of
event marks set in the data being recorded.
When playback ready, this shows the total number
of event marks set during recording.
NOTE
o
Press the
0
REC button when recording to set
an event mark.
o
A maximum of 200 event marks can be added to
a single data file.
e
Bar meters
Bar meters appear here during playback, recording
and when record ready.
The number of channels shown can be changed by
selecting a bar meter, pressing the ENTER button and
turning the VALUE dial. See “8-6. MISC” on page 33
to set the display unit and number of channels.
When all channels are not visible on a single screen,
the channels shown can be changed by pressing
the Disp.Module (F4) button
f
File name
This shows the name of the file that will be recorded.
During playback and when playback ready, this
shows the name of the playback file.
g
Date and time
This shows the current time of the LX-1000.
When playing back and when playback ready, this
shows when the recording was made.
See “8-6-2. SET TIME” on page 34 to set the dis-
play format.
h
Function buttons
This shows the current assignments of the Function
(F1, F2, F3, F4) buttons.
The functions shown change according to the open
screen.
i
Folder name
This shows the name of the recording folder.
When playing back and when playback ready, this
shows the name of the playback folder.
j
Information
Recording media information
This shows media capacity use and the playback
position (page 11).
Status indicators
SHIFT button pressed
Buttons locked
LXK Navi connected
GPS satellite signal captured
Voice memo on
CAN recording available, CAN data not received
5. Basic operation