Teac ER-LXRC1000, Instructions For Use Manual

Page: 21 / 40

21
8-1-1. Selecting values from setting
options
A value for a setting such as the sampling frequency can
be selected by pressing the ENTER button to open a list
of options to the right of the setting value.
The current setting value is shown to the right of the
setting item.
Turn VALUE dial
to move
Selection
position
Current setting value
1
Turn the VALUE dial to select the desired value.
Turn it clockwise to move down the list.
Turn it counterclockwise to move up the list.
o
The options can be scrolled if they cannot all be
shown on screen at the same time.
2
Press the ENTER button to confirm the setting
value.
The selection screen will close.
o
Press the CANCEL button to cancel changing a
setting.
8-1-2. Inputting numbers as setting
values
To input numbers as the value for a setting such as the
COEFFICIENT, press the ENTER button to open the num-
ber input screen.
The currently set number is shown near the top of this
screen.
1
Turn the VALUE dial to select the position for
character input, and press the ENTER button.
e
o
Press the F2 (CANCEL) button to cancel changing
the input characters.
o
Press the F4 (Backspace) button to delete the
rightmost character.
o
On this screen, only numbers can be input.
2
Repeat
1
to input all the characters. When
done, press the F1 (OK) button to return to the
Menu Screen.
o
The F1, F2 and F4 buttons correspond to the OK,
CANCEL and Backspace commands.
The selection cannot be moved to these items.
8. Settings