36
Bluetooth® function
Bluetooth notes
When using this unit with a mobile phone or other Bluetooth
devices, they should be no more than about 10 m (33 ft)
apart. Depending on the circumstances of use, however, the
effective transmission distance might be shorter.
Wireless communication with every device that supports
Bluetooth wireless technology is not guaranteed.
To determine the compatibility between this unit and
another device that supports Bluetooth wireless technology,
refer to that device’s operation manual or contact the shop
where you purchased it.
1
Turn the SOURCE knob to select Bluetooth.
Display
example
Bluetooth
PM 07:28
Bluetooth indicator
2
Pair or connect with another Bluetooth
device.
Pairing with another Bluetooth device
Pairing this unit with another Bluetooth device is nec-
essary the first time you connect with that Bluetooth
device.
If no paired Bluetooth device is found, this unit will
become ready to pair with another device. When this
unit is ready to pair, its Bluetooth indicator blinks.
When this unit's Bluetooth indicator is blinking, con-
duct pairing using the other Bluetooth device.
For details, refer to the operation manual of that
Bluetooth device.
When pairing with a Bluetooth device that supports
aptX® or AAC, it will automatically connect using aptX
or AAC.
Connecting with an already paired Bluetooth
device
When the playback source of this unit is set to
Bluetooth and the other Bluetooth device is on, the
Bluetooth function will be enabled and they should
connect automatically.
If they do not connect automatically, connect them
manually.
o
If a request for a passcode appears on the screen
of the Bluetooth device, enter “0000” (four zeros).
o
When this unit and the other Bluetooth device are
connected, the Bluetooth indicator stops blinking
and stays lit.
o
When pairing or connecting with another Bluetooth
device, they should be within a few meters of each
other. If they are too far apart, pairing and connec-
tion afterwards might become impossible.
o
When Bluetooth is selected as the playback source
for this unit, the Bluetooth device that was last
connected to it will automatically be connected
again. If you want to connect with a different
Bluetooth device, conduct pairing with that
device.
o
This unit will store information for up to eight
pairable devices. If more than eight devices are
paired, the oldest pairing information will be deleted
and the new pairing information will be added.
V
ATTENTION
Even when this unit or the other Bluetooth device is
ready to connect, if the Bluetooth indicator on this unit
continues to blink for 10 minutes, it will automatically
enter standby mode. To use this unit, you must turn
it on again.
If the indicator continues blinking for a long time,
restart both this unit and the other Bluetooth device
and then reconnect them.
Summary of Contents for cr-h101dab
Page 1: ...Z CR H101DAB CD Receiver REFERENCE MANUAL...
Page 42: ...42...
