Teac CG-10M, Owner'S Manual

Page: 12 / 16

12
Connecting equipment
A
Clock output (10MHz OUT) connectors
These output 10MHz clock signals.
Connect these clock output connectors to the clock input con-
nectors of CD players, D/A converters and other digital devices
that support 10MHz input.
Use a commercially-available BNC coaxial cable for
connection.
B
Power inlet (~IN)
Connect the supplied power cord here.
After all other connections are complete, connect the power
cord’s plug to a wall outlet.
V
Do not use any power cord other than the one
included with this unit. Use of other power cords
could result in fire or electric shock.
V
Disconnect the power plug from the outlet if you
will not use the unit for a long time.
V
Complete all other connections before turn-
ing the unit on.
o
Carefully read the manuals of the devices that you are
connecting and follow their instructions when making
connections.
o
Do not bundle connecting cables with power cords. Doing
so could cause noise.
o
Connect all plugs completely.
A B
BNC c
oaxial c
able
Included p
ow
er c
or
d
c
Wall outlet
Digital device that supports
10MHz input
(UD-503, etc.)